With the popularity of the muscle cars of the desire to have a strong and powerful car has the passionate desire of many motorists have been. A great change is to achieve this goal through the use of an exhaust system. This device uses a reduced exhaust back pressure to increase performance is a bit 'and offer the classic sound of a muscle car.
This system can be placed in the car only a few hours with simple mechanical means.
Exhaust System
1 Set your car in a parking ramp and use a parking brake. Thenext step is to control the front wheels to prevent movement.
2 Use a penetrating fluid on the exhaust, so it is easier to remove the tube. Allow the liquid for a few minutes.
3 Maximum safety glasses with gloves to avoid cutting yourself with the rust and metal edges. Loosen the exhaust using an adjustable wrench.
4 Remove the screws from the exhaust hangers on the back of the car found. Separate the system fromHead through the pipes from the rear of the car. Remove the rubber isolators and hooks adjustable tube with the key. Now you are able to reduce the discharge of his car. Save the rubber bushings and brackets for the pipe system below. Keep the old exhaust system on the side.
5 Install the new exhaust system. Install the rubber insulators and clamps on the new exhaust system and the original screws with an adjustable wrench. Everything isinstalled as to exhaust the stock market.
6 They have the system on the vehicle. The muffler should be directed to the rear. Place the tubes of the new system on its head until the tubes are seated. Secure the bracket to the underside of the car and install the brackets that are supplied to the system. Tighten the clamps with an adjustable wrench.
7 Remove the pads and leave the parking brake. Drive your car in front of the ramps and you're done! Your car will beNow the muscles have to search.
To install an exhaust system
No comments:
Post a Comment